10 Easy Ways to ROOT QMobile King Kong Max Without PC & TWRP via Magisk - Latest One Click Root Method SuperSu , KingRoot , Frama Root , iRoot APK , Unroot , Baidu Root Download and Install Complete Guide

SAHIL
0

Top 10 Easy Methods to Root QMobile King Kong Max

After Reading this Blog you will be eligible to Root Your QMobile King Kong Max . To Install Root on QMobile King Kong Max is not a Bad thing , Actually It is Key to Unlock Some Hidden Features Present in the Software Firmware File of your QMobile King Kong Max . But It may be Possible that during the Rooting process your QMobile King Kong Max Get Bricked or the Software as Well as Firmware both can be Damaged . So Do Anything with Open Eyes and Decide Rigidly that you are Going to Root your QMobile King Kong Max Device . The Upper two Lines are Observed in Less Than 1% Cases Only , SO if You are Going to Root QMobile King Kong Max , Don't Worry We are Here to Guide you Completely . If You Read Each and Every Instructions Carefully before Rooting then you can Safely Root Your QMobile King Kong Max Device and Also Make Sure that You Have Downloaded the Right Root File for Your Model As Well as Cross Check the Model Name of your QMobile King Kong Max Device . Starting from the First Section of the Post to the Last Sectiona 10 Different Methods will be introduced to You for Rooting QMobile King Kong Max and At the Last You can Select One Method Which suits Best for You .

Preparations - Actions Needed before you Do Anything

  1. Backup all your files of QMobile King Kong Max first
  2. Remove Sim Card from QMobile King Kong Max
  3. Please Do Anything at Your Own Risk we are Not Responsible for Any Damages
  4. Start Anything from your QMobile King Kong Max after Turning it ON
  5. At least 50% battery level.
  6. Disable Fast boot in Settings->Battery
  7. Internet connection necessary (Wi-Fi network suggested).
  8. The Following Guide is Only for QMobile King Kong Max , Never Ever Try this on Any Other Model except QMobile King Kong Max
  9. Bootloader of QMobile King Kong Max Should be Unlocked
  10. Allow installation of apps from unknown sources.

     Settings > Security > Unknown Sources

Table of Contents

What Is Rooting?

From the day you Buy QMobile King Kong Max . It’s new, shiny and neat. You can go online from it while you’re out and about and download cool apps on QMobile King Kong Max to keep you company whenever you get bored. But can you download any app you want on QMobile King Kong Max ? What about custom themes on QMobile King Kong Max? And did you ever feel like altering or replacing system applications and settings on your QMobile King Kong Max because they’re not so user friendly? Well, the thing is you can’t do whatever you want with your QMobile King Kong Max in Unrooted form . For security reasons, QMobile King Kong Max manufacturers and mobile network operators impose software limitations. However, these limitations can be overruled by rooting your  QMobile King Kong Max Device , although it is not advisable. Especially if you don’t have antivirus for Android installed, to protect you from mobile malware. Rooting is a process that allows you to attain root access to the Android operating system code (the equivalent term for Apple devices id jailbreaking). It gives you privileges to modify the software code on the device or install other software that the manufacturer of QMobile King Kong Max wouldn’t normally allow you to. And for good mobile security reasons: they don’t want users to make modifications to the QMobile King Kong Max that could result in accidents beyond repair; it is easier for them to offer support if they allow users to only use the same unmodified version of the software means that You will only get warranty for QMobile King Kong Max If you have not Rooted it Yet . But Don't Worry If you still Want to Root QMobile King Kong Max then Go ahead , Their are Many ways by which we Can remove root access from QMobile King Kong Max Anytime .


What is Magisk ?
If you’ve been around the Android world for the last few years, you’ve probably heard the term “Magisk” being thrown around. It’s a relatively new tool for customizing Android devices. Magisk is an alternative to the long-standing SuperSU, but it’s much more than just a root method. There are some key things you should know about this popular tool before you Start Rooting QMobile King Kong Max .Magisk is known as a “systemless” root method for QMobile King Kong Max. It’s essentially a way to modify the system without actually modifying it. Modifications are stored safely in the boot partition instead of modifying the real system files. This is the most important feature of this tool. Since the original system files remain unchanged in QMobile King Kong Max, modifications can go undetected by Google SafetyNet.

What are the Benefits of Rooting QMobile King Kong Max ?

In the event that you want to take full power of your QMobile King Kong Max, the best method is actually to root it. In concrete terms, this suggests that you will be a almighty administrator of your QMobile King Kong Max. Keep in mind though, the manufacturer impose software limits to restrict you from doing foolish acts. In the event that your QMobile King Kong Max is rooted, you can brick it by making dangerous commands. Using a rooted QMobile King Kong Max, you will be capable to:

  • You can flash Custom ROM with TWRP Recovery on QMobile King Kong Max
  • You can flash modding zip files to customize your QMobile King Kong Max
  • Easy to use Xposed Modules’ with Rooted QMobile King Kong Max
  • Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU
  • You can always take FULL NANDROID Backup on QMobile King Kong Max in case of any modding or flashing.
  • Easy access to restore the Nandroid Backup.
  • You can flash the image file using OrangeFOX Recovery on QMobile King Kong Max .
  • Can remove all bloatware in QMobile King Kong Max using TWRP Recovery.
  • To underclock and overclock.
  • You can clean Wipe, Cache, and Data and Also Wipe Dalvik Cache on QMobile King Kong Max .
  • Increase performance of your QMobile King Kong Max by tweaking kernel and overclocking device.
  • Increase performance by hibernating battery consuming apps using apps like greenify on QMobile King Kong Max.
  • Increase performance of QMobile King Kong Max by uninstalling ram-hogging inbuilt apps.
  • Able to customize devices model, screen resolution, imei no, etc.
  • You Can Change IP Address of QMobile King Kong Max Easily .

What are the Disadvantages of Rooting QMobile King Kong Max ?

Rooting your QMobile King Kong Max device comes with cons or disadvantages as well. The biggest disadvantage is that the Phone warranty will be void once you root your device because of manufacturers ships unrooted and locked devices. Apart from that, while rooting the QMobile King Kong Max, if anything goes wrong, then your device might be bricked. Manufacturers only provide updates to the QMobile King Kong Max devices which are not rooted, hence your device will no longer remain secure because it would not receive official firmware updates by the manufacturer. Their are many other disadvantages also :-

 1. You can turn your QMobile King Kong Max into a brick. Well, not literally, but if you goof up the rooting process, meaning the code modifications, your QMobile King Kong Max software can get so damaged that your QMobile King Kong Max will basically be as useless as a brick.
 2. Your QMobile King Kong Max warranty turns void. It’s legal to root your QMobile King Kong Max; however, if you do it, your device gets straight out of warranty. Say you root your QMobile King Kong Max and some time after that, you experience a malfunction – hardware or software related. Because of the Android rooting, the warranty is no longer valid, and the manufacturer will not cover the damages of QMobile King Kong Max.
  3. Malware can easily breach your QMobile King Kong Max security. Gaining root access also entails circumventing the security restrictions put in place by the Android operating system. Which means worms, viruses, spyware and Trojans can infect the rooted Android software if it’s not protected by effective mobile antivirus for your QMobile King Kong Max device. There are several ways these types of malware get on your QMobile King Kong Max: drive-by downloads, malicious links, infected apps you download from not so reputable app stores. They take over your QMobile King Kong Max and make it act behind your back: forward your contact list to cybercrooks, sniff your e-mails, send text messages to premium numbers, racking up your QMobile King Kong Max, and collect personal data such as passwords, usernames, credit card details that you use while socializing, banking and shopping from your QMobile King Kong Max.
 
Our Advice Before Rooting QMobile King Kong Max
This section is the most important Section of this post in my point of view . If  You have decided to Root your QMobile King Kong Max devices after the summation of Pros and Cons of Rooting , then Please Go Ahead . But Before moving to next Section Please Just Go through following lines :
  •  If you still want to root your QMobile King Kong Max device, make sure you research the process very well, as it differs depending on the smartQMobile King Kong Max type and brand. It’s better you ask for expert advice on dedicated forums, or better yet, ask an experienced person to root it for you. All these in order to ensure you don’t turn your device into a brick.
  •  Install proper antivirus protection for your QMobile King Kong Max, even before rooting the device, to fend off malware infections. BullGuard Mobile Security 12 offers mobile antivirus protection for a wide range of mobile operating systems, including antivirus protection for Android devices.
  •  Here’s some good news: say you do resort to rooting your device. If for some reason you change your mind about it, you can always un-root it. In this case too Please Go through the Last sections of this blog , their you can find the Ways to restore QMobile King Kong Max Back to Original Condition and Disable Root on QMobile King Kong Max.

Pre-Requirements

  • A Good Brain + Time
  • Be Have Some Patience
  • Download the Files Related to QMobile King Kong Max very Carefully
  • Backup Your Stock Rom
  • Make Sure USB Drivers are Installed If you are Using PC Method
  • Close All the Apps Before Turning Off QMobile King Kong Max

How to Flash/Install TWRP Recovery on QMobile King Kong Max ?

Step 1: First enable the USB debugging option in QMobile King Kong Max.
  • To enable USB debugging option we first need to make sure the developer options are active. for that we need to go to your Settings -> About Phone -> Now tap the build number 7-8 times until you see a message ‘you are now a developer’.
  • Now as we have enabled developer options, go back to Settings-> developer options -> and now enable USB debugging also enable OEM unlock.
  • enabling usb debugging mode in QMobile King Kong Max image.
  • Screenshot of enabling usb debugging mode in QMobile King Kong Max.
Step 2: Open adb command window.
  • Now Open Fastboot folder (The files that you have extracted from recovery.rar file)
  • Location would be Download > fastboot > fastboot
  • On the above folder  you will find the adb.exe or fastboot.exe.
  • Hold the Shift Key and right-click on any blank space and select Open command window here.
  • ADB folder i.e Fastboot folder image
  • Screenshot of ADB folder i.e Fastboot folder .
Step 3: Connect the QMobile King Kong Max to PC.
  • Connect your QMobile King Kong Max to PC or Laptop with using USB Cable.
Step 4: Reboot QMobile King Kong Max into Fastboot Mode.
  • Now we need to reboot QMobile King Kong Max into fastboot mode by typing the following command.
  • adb reboot bootloader on QMobile King Kong Max .
Step 5: Your device will reboot into fastboot mode.
  • If it doesn’t, check if your USB cable is connected properly and you have drivers installed properly.
  • You can check a list of connected device by typing the following command.
  • fastboot devices
  • screenshot of detect device in adb mode Image.
  • screenshot of detect device in adb mode.
Step 6 Flash the TWRP Recovery.
  • This is the tiime to flash the TWRP Recovery. To Start flashing the recovery, type the following command.
  • Fastboot flash recovery twrp.img
  • Screenshot of installed twrp recovery in QMobile King Kong Max successfully image
  • Screenshot of installed twrp recovery in QMobile King Kong Max successfully
  • That’s it! You have installed TWRP recovery on QMobile King Kong Max .
If TWRP Recovery is Not Getting Installed on QMobile King Kong Max Then Their are Some Other Custom Recoveries Available for QMobile King Kong Max . Kindly do search for that .

How to Unlock Bootloader of QMobile King Kong Max ?

Here I guide you to unlock bootloader on QMobile King Kong Max in short. If you want to full guide to unlock QMobile King Kong Max bootloader then go and search for your device model If the Following Steps Don't Worked for you :
  1. QMobile King Kong Max must be power on.
  2. Then go to Settings
  3. Then go to About device
  4. After that, tap 7 times in build number to become a developer.
  5. After, enable the developer mode in QMobile King Kong Max.
  6. First, go to the menu.
  7. Then, go to setting
  8. Now scroll down and click on the Developer option .
  9. Toggle the OEM unlock option ON in your QMobile King Kong Max.
  10. Confirm the same by clicking the enable option Finally.
Congratulation! You have successfully unlocked bootloader on QMobile King Kong Max.
Now I Suppose that You have Fulfilled All the Pre Requirements and I can Move Further to the 10 WAYS by which you can ROOT QMobile King Kong Max , Which is the main Highlight of this post . So Lets Move to the First Method

Method #1: Root QMobile King Kong Max via Magisk

  1. First of all, download the latest Magisk Zip and Magisk Manager APK file for your QMobile King Kong Max Device.
  2. Move the Magisk zip file to your QMobile King Kong Max’s internal storage.
  3. And make sure you have a Custom Recovery Like TWRP installed on your QMobile King Kong Max.
  4. Now Boot your QMobile King Kong Max to Recovery Mode by pressing Volume up + Power Button at the same time until you see the Boot Animation.
  5. Tap on Install from the TWRP Recovery page.
  6. Now locate Magisk.Zip file ( Downloaded Earlier ) from your internal storage and select it.
  7. After Tap on Swipe To Confirm Flash.
  8. Then Next flash Lazy Flasher zip file, Otherwise, your QMobile King Kong Max will not boot.
  9. After that, Wipe Cache of QMobile King Kong Max.
  10. Wipe Dalvik Cache of QMobile King Kong Max.
  11. Now Select on Reboot Option.
  12. Once your QMobile King Kong Max boots up, install Magisk Manager APK.
  13. Congrats Your QMobile King Kong Max Device is now Having Root Access.
  14. If This Method doesn't Work for You then I Suggest to Use Another Methods Out of the 10 Enlisted Various Methods to Root QMobile King Kong Max.

Method #2: Root QMobile King Kong Max By SuperSU

  1. For this method, you require TWRP recovery installed on your QMobile King Kong Max.
  2. Switch off your QMobile King Kong Max device.
  3. Then boot QMobile King Kong Max into TWRP recovery mode.
  4. For that, press and hold the Volume down + Power button simultaneously.
  5. If you are having problem to boot into TWRP, use Quick Reboot app from Google Play Store.
  6. Let’s install the downloaded Super SU zip file exclusively for QMobile King Kong Max.
  7. For that, click on the Install option present on the TWRP recovery.
  8. This will show you files and folders present on your mobile.
  9. Select the downloaded SuperSU.zip file.
  10. On the next screen, swipe right to start the Rooting process.
  11. As soon as the process finishes, you’ll see a successful message on the screen.
  12. Just click on the Reboot System option to restart your QMobile King Kong Max.
  13. Finally! This is how you can root QMobile King Kong Max using Super SU .


Method #3: Root QMobile King Kong Max By KingoRoot APK

  1. Install KingRoot app on QMobile King Kong Max
  2. If you get ‘Blocked by Play Protect’ error, click on Details.
  3. Click on Install anyway.
  4. If KingRoot fails to install, then refer Another Method for QMobile King Kong Max.
  5. Next, open settings and select the Accessibility option.
  6. Under Services, click on KingRoot.
  7. Enable accessibility for KingRoot.
  8. Tap on OK.
  9. Now launch the installed KingRoot app.
  10. Click on the Try Root option.
  11. This will initiate the process of rooting QMobile King Kong Max .
  12. Wait until it finishes.
  13. It will complete in hardly a few minutes.
  14. After successful completion, you will see the following message in the app.
  15. Finally! QMobile King Kong Max is successfully rooted using the KingRoot app.


Method #4: Root QMobile King Kong Max without PC

  1. Install the FramaRoot app for QMobile King Kong Max and launch it.
  2. You will find three options in the app.
  3. Select Install Superuser or Install SuperSU option.
  4. You’ll also see exploit options. Select Gandalf.
  5. This will start the process of rooting QMobile King Kong Max.
  6. Be patient and wait until it completes.
  7. As soon as the process completes, you’ll see a popup message as shown below.
  8. Reboot your device.
  9. You’ll notice an app called Superuser Automatically installed on your QMobile King Kong Max.
  10. This will confirm that your QMobile King Kong Max is successfully rooted using the Framaroot app.
  11. This is how you can root the QMobile King Kong Max Android Device .

Method #5: Root QMobile King Kong Max with PC

Their are Two separate Methods to Root QMobile King Kong Max Using PC :
Method #A : Using DrFone Root .exe PC
  1. Download and install Dr.fone Root software .exe on your PC.
  2. Connect QMobile King Kong Max device to PC/Laptop via USB cable.
  3. Dr.Fone Root - Connect Your Phone To PC
  4. Once the QMobile King Kong Max is connected, click on the “Start” button.
  5. Now the software will then find your device package and prepare a way to root your QMobile King Kong Max.
  6. Click on “Root Now” to begin rooting your QMobile King Kong Max.
  7. The QMobile King Kong Max will ask if you would like to root the device; tap on “Confirm” to continue the rooting.
  8. Congo You have successfully rooted QMobile King Kong Max using Dr.Fone software.
Method #B : Using KingoRoot.exe PC
  1. First off, enable Developer Options on QMobile King Kong Max.
  2. Head over to Settings > About Phone > Tap on Build Number 5 to 7 times.
  3. Go Back > Tap on Developer Options > enable USB Debugging option.
  4. Now download Kingo Root Software on your Windows PC and install it.
  5. Open Kingo Root Software.
  6. Connect QMobile King Kong Max to PC via USB cable as soon as you Connect your Phone. It will show you a Prompt on your QMobile King Kong Max device > Tap on Okay.
  7. Once your Device is Recognized, Tap on Root.
  8. It will take around 5-7 minutes to complete the Rooting Process.
  9. Once the rooting process is finished, your device will automatically Reboot.
  10. All Done! You have Successfully Rooted your QMobile King Kong Max.
Before Using Method 7,8,9,10 I suggest you to Try This Method 5 and 6 First 


Method #6: Root QMobile King Kong Max Without TWRP Recovery

  1. First, Download iRoot APK on your QMobile King Kong Max device.
  2. Open the downloads folder and Tap on the “iRoot.apk” file to install it.
  3. If you get a warning message, then follow the below steps.
  4. Go to Settings > Security > enable Unknown Sources option.
  5. After the app is successfully installed.
  6. Open iRoot App > Tap on the “Root Now” button.
  7. iRoot Android APK will start Accessing Root on QMobile King Kong Max.
  8. The rooting process will start on your Phone. You will see a notification “Root Succeeded”.
  9. That’s it. You have Successfully Rooted QMobile King Kong Max Without TWRP Recovery.

Method #7: Root QMobile King Kong Max via Flashing Custom Rom

  1. This Process May Lead to Wipe your All Data .
  2. First of all, make sure to download and move all the required ROM packages on your QMobile King Kong Max Internal storage.
  3. You can reboot your QMobile King Kong Max into TWRP Recovery and Swipe Allow Modifications (Appears for the first time only)
  4. Once you are in TWRP Recovery, first of all. Take a complete backup of stock or custom ROM using TWRP.
  5. Now wipe the cache, data, and system before flashing the PreRoot Custom Rom on QMobile King Kong Max.
  6. To Wipe data: Go to Wipe —> Advanced Wipe and select Dalvik/ART cache, cache, System, Vendor, and Data and then swipe to wipe. 
  7. TWRP-Wipe-System-Data-and-Cache-Screenshot
  8. Now you can install the System image file in TWRP: Install -> Install Zip -> select pre-rootQMobile King Kong Max.zip .
  9. That’s it! Reboot and enjoy Pre Rooted QMobile King Kong Max device.

Method #8: Root QMobile King Kong Max By Flashing Stock Rom

This is Another Alternative Method to Root Phone . Stock Rom is the Original Android Database Code of your mobile device Provided by the Manufacturer Itself. But Their Are Some Ways By which an Android Developer can Inject the Root File Inside the Coding of Stock Firmware So, At the end of Compiling ROM the Rom can be Termed As PreRooted Stock Rom for QMobile King Kong Max . But Always Keep in mind that Flashing Stock Rom will Wipe your Android device Completely. You Can Make it Possible by the Steps As Follows :
  1. Download the pre-rooted Stock ROM & the Modem/BL Zip files. Transfer them to the internal storage of your QMobile King Kong Max device.
  2. Boot into recovery mode on your QMobile King Kong Max .
  3. Power off your device and wait until it’s completely turned off.
  4. As you’re in the TWRP recovery, make a complete nandroid backup of your device. You can follow our definitive guide for nandroid backup on QMobile King Kong Max.
  5. Now, make a complete wipe of the device as we want a fresh installation. To make a clean wipe, just do a complete factory reset and also wipe the Dalvik cache , recovery-wipe .
  6. Flash the ROM now. Choose the Install option from the recovery menu and choose the ROM zip from the file manager. Similarly, flash the Modem/Bootloader zip and Recovery-install-ROM
  7. After flashing both the Zips, wipe cache/Dalvik cache. You can do this from the Wipe menu.
  8. Reboot the QMobile King Kong Max device.
  9. Don’t worry if you don’t see the signal on your device after first boot. Reboot the device once again and it will be fixed.
  10. If Signal Is Not Yet Fixed then You may have to flash separate Kernel for QMobile King Kong Max via Custom Recovery .


Method #9: Root QMobile King Kong Max By Flashing Factory Image

The procedure to flash a factory image is Alternative Root Method for QMobile King Kong Max and can differ from one device to another. In the case of QMobile King Kong Max, the steps are simple:
  1. Download and set up the ADB and Fastboot tools.
  2. Download the factory image from the Android website. Unzip the download on your desktop.
  3. Connect your QMobile King Kong Max via USB and boot into Fastboot mode.
  4. Launch the Command Prompt or Terminal app.
  5. At the command prompt, run flash-all.bat on Windows, or flash-all.sh on macOS or Linux.
  6. Wait for it to finish, then reboot QMobile King Kong Max .
  7. That will take you to a stock PreRooted ROM, with stock recovery as well on QMobile King Kong Max. Lock the bootloader, and you'll be completely back to normal.

Other QMobile King Kong Maxs might have different instructions. You'll usually find them outlined on the same site where you downloaded the images from. Just remember that in most cases, flashing a factory image will completely wipe your QMobile King Kong Max. So do Anything carefully. 

Method #10: Root QMobile King Kong Max with Orange FOX Recovery

  1.  Unlock the bootloader. Read and follow our previous guide on how to unlock QMobile King Kong Max bootloader.
  2.  Download and install QMobile King Kong Max ADB Fastboot Driver on your computer. You don’t need to do this if you already have Flash tool installed (not the portable version).
  3. Download Orange Fox TWRP Recovery here. It’s a zip file. You need to download it on both your computer and your QMobile King Kong Max.
  4. On your computer, extract the Orange Fox zip file (OrangeFox-R11-unified-QMobile King Kong Max.zip) you have downloaded. You will get many files including a file named “recovery.img“.
  5. Copy that recovery.img file to your ADB folder. Usually, the ADB directory is located at C:\adb\.
  6. Enable USB Debugging option. This option is available within Developer Options menu. Hence, you have to enable it at first.
  7. Enabling Developer Options, go to: Settings >> About QMobile King Kong Max >> tap the version 7x >> You are developer!
  8. Enable USB Debugging, go to: Settings >> Additional Settings >> Developer Options >> USB Debugging >> toggle it on.
  9. A notification will pop up on your screen. Tap “OK“.
  10. Now connect your QMobile King Kong Max to your computer using its USB cable.
  11. On your computer, hold down the Shift key and right-click anywhere inside the ADB folder (C:\adb\). Choose “Open PowerShell window here“.
  12. Now type following command and hit Enter key to execute it: >> adb devices / adb reboot bootloader / fastboot devices
  13. This instructs your computer to establish ADB connection with your QMobile King Kong Max mobile device while verifying any device attached. Second, this also reboots your device into Fastboot mode (bootloader mode). You will see your QMobile King Kong Max rebooting and you will also see the Android Fastboot logo displayed.
  14. Do the “Hot recovery boot” by typing the command below: fastboot boot  >>  recovery.img
  15. At this stage, your QMobile King Kong Max shall reboot into Orange Fox recovery.
  16. Do the “Swipe to allow modifications“. You shall enter the main menu afterward.
  17. You will then see the main menu of Orange Fox recovery. Choose “Install“.
  18. Find and select the Orange Fox zip file (e.g: OrangeFox-R11.QMobile King Kong Max.xle.zip).
  19. Do the “Swipe to Install” action. As soon as you swiped, your QMobile King Kong Max will flash the zip file of Orange Fox recovery.
  20. Your QMobile King Kong Max will automatically reboot into Orange Fox recovery again. This time is not a hot boot but the actual recovery booting using the one installed on your QMobile King Kong Max already .
  21. Done. Finish. End. From here, you can proceed to either use it for rooting or flashing other mods such as Camera2 API enabled, etc.  
    One thing that we really like about Orangefox is also the inclusion of Magisk. Once flashed, you don’t need to manually download and copy Magisk to your QMobile King Kong Max. 
  22. Tap on the Orange Fox cup menu icon in the main menu.
  23. Tap the “Install” button in the Magisk section.
  24. Follow the on-screen instruction. Orange Fox will start to flash the in-built Magisk package. Once done, your QMobile King Kong Max should reboot into system.
  25. Alternatively, you can choose “Reboot” from the main menu, then choose “System“.
  26. Voila! Your QMobile King Kong Max is now rooted. You can confirm the status by downloading Root Checker app from Play Store.
  27. You will also notice a new app called “Magisk Manager” on QMobile King Kong Max. The app is crucial to manage the root access. You can allow and block any apps that request for root access. Additionally, you can also install Magisk modules within the app.
  28. While you are still in recovery mode, go to the Orange Fox cup menu that cap the third menu. Make sure the following options are activated:
  • Support Android Incremental OTA
  • Include system in OTA survival
  • Incremental OTA signature verification
  • Disable DM-verity
  • Disable forced encryption.
I Think that it is Very Long Process , So Try this Only After Other 9 Methods to Root QMobile King Kong Max.
What to Do In Case If QMobile King Kong Max Get Bricked or Damaged During Rooting ?
If you Get into the Upper written Situation while Rooting QMobile King Kong Max Then , Their is no need to Worry You can Resolve Your Problem Quickly as well as easily . Their may be Two Situations :
Situation A : QMobile King Kong Max Get Stuck into Logo
Solution : To fix this issue Simply Go back to TWRP Recovery and Select on Restore Nandroid backup Option ( Select the File You h've saved while Backup Before Starting Root ) Just flash That File and after That Your QMobile King Kong Max device will come into normal state .
Situation B : The Screen Turns ON But Nothing comes After it
Solution : To Fix this issue You need to Unbrick QMobile King Kong Max and This can be done by Flashing Stock Firmware of QMobile King Kong Max using PC , You can refer Method#8 to Fix this Problem.

How to Check Is QMobile King Kong Max Rooted Successfully or Not ?
After Booting up QMobile King Kong Max , You can See that their will be some new Apps Automatically Installed on QMobile King Kong Max which exhibit the Root Permission to Some Eligible Apps . But If You Want to Cross Check If QMobile King Kong Max Rooted Successfully or Not Then Please Do Follow the Below Steps :
  1. First, download the Root Checker App from the Google Play Store.
  2. Then Open that App on Your QMobile King Kong Max Device.
  3. After that, Click on “Verify Root”.
  4. Now, here you will see the message “Congratulations! Root access is properly installed on this device” if your device has been rooted successfully.
  5. If you Don't Get the Message as in the Step 4 Then Please Follow Some Different Method Out of the 10 Methods to Root QMobile King Kong Max.
  6. Repeat Step 5 If QMobile King Kong Max is Still not Rooted.

Can We Install Custom Rom on QMobile King Kong Max After Root ?

Yes , you can install Any Custom Rom on QMobile King Kong Max After Getting Root Access on QMobile King Kong Max . Their are Abundant Custom Roms Exclusively Available for QMobile King Kong Max to Install on it Such as :
Android 12 ROM:, Android 11 ROM :, Android 10 Q:,Android 9 Pie:, iOS 14 Rom:, EMUI OS 11:, MIUI 12.5:, One UI 3.0:, Flyme OS:, Graphene OS:, LeWa OS:, Liquid Remix :, Stag OS:, Syberia Project :, Candy OS:, XenonHD:, CopperHead OS:, Realme UI:, DerpFest OS:, Carbon ROM:, AOSmP ROM:, Cosmic OS:, PE Extended ROM:, Arrow OS:, Pixel Plus ROM:, Evolution X ROM:, MSM Extended ROM:, POSP ROM:, Pixys OS:, MOKEE ROM:, AICP ROM:, OMNI ROM:, Revenge OS, Android 10 Q ROM:, Android 9 Pie ROM:, Liquid Remix ROM, Lineage OS:, Havoc OS:, Resurrection Remix:, DerpFest ROM:, Bootleggers ROM:, CrDroid OS:, AOSiP OS:, Nitrogen ROM:, Pixel Experience ROM:, Fulmics Rom:, AOSP Extended Android 11 for Xiaomi Poco M3:, Renovate Ice ROM:, Oxygen OS Rom:

Can I Remove Root on QMobile King Kong Max ? or How to UNROOT QMobile King Kong Max ?
Now After Succesfull Completion of Rooting QMobile King Kong Max . If you have changed Your Mind or Due to Any Other Reason you want your QMobile King Kong Max back to Normal State then Please Go Ahead , To remove Root Access from QMobile King Kong Max is 100% Possible , Just Follow the Following Steps :
  • You can Download SuperSU APK. 
  • Open the SuperSU App, go to settings and press on Full Unroot. 
  • Following that, your QMobile King Kong Max device will no longer be rooted.

Conclusion:

So , That's All I Hope that I Have Covered All the Methods used to Root QMobile King Kong Max in this Universe . You can Select any Method out of 10 to Start Process . However It wouldn't affect anymore If You are having PC , not Having PC , Not Having Custom Recovery Like TWRP or  You have Less Time to Root QMobile King Kong Max , I have explained Every Method from Quick Methods to Time taking Methods to Root QMobile King Kong Max . Now It is Upto You that How you want to Root QMobile King Kong Max . I Hope this content is Helpfull for you .
Remember that this Website is for Educational Purpose Only. All the Posts , Images and articles are the property of their respective owners .  " Lineageos18.com "  is not Responsible for any Damage Occured to your QMobile King Kong Max Device . Do Anything at your Own Risk.

BEST OF LUCK

Post a Comment

0Comments

If you have aby doubts please let me know

Post a Comment (0)

#buttons=(Accept !) #days=(20)

Our website uses cookies to enhance your experience. Learn More
Accept !